Project facts
| Status | Frame complete, ready for roofing |
|---|---|
| Location | Jerilderie, NSW Riverina |
| Design | Two storey, 4 bedroom kit home |
| Build team | Justin and Alecia, owner builders, with their mate Ben |
| Foundations | Steel subfloor |
| Frame | Light gauge steel wall frames, upper floor and roof trusses, with external stairs between the levels |

Justin and Alecia built their two storey kit home at Jerilderie in the NSW Riverina, with their mate Ben helping Justin stand it up. The frame left our supplier on a trailer for the long run north.

Before anything was made, every stud, plate, brace and truss was modelled in 3D. These renders come straight from that frame model.

From above you can see how every truss lands on the wall frames below.

On site, the frames are stacked and ready to go up.

From the drone the subfloor and first frames are going in.

The ground floor frame is up and braced.

The upper floor decking goes on, with scaffolding around the frame.

From above, the full footprint of the home is clear.

From the ground the two storey frame stands tall on the cleared block.

The external stairs are in, linking the two levels.

With the roof trusses on, the frame is complete and ready for roofing.